![]() ![]() Support should be contacted for making possible repair arrangements. If the data is not seen, it may be an indication of a hardware issue, in which case Digi Tech. If you can see the characters you typed in step 7 above, the port is looping the data properly. By default, the combined operation of the class installer for the Ports device setup class and the Serial function driver configure a device as a COM port. COM port numbers should only be used with COM names. These characters should appear as you type them.Ĩ. If you use a COM name, you must obtain the COM port number from the COM port database.If a loopback needs to be made, see this Knowledge Base article: Creating a Loopback Adapterħ. They are small RJ-45, DB-25 or DB-9 plugs with no cable. SerialToIP is a Terminal server software which allows you to establish a connection with a device attached to a serial port over LAN or the Internet using well-supported TCP socket communications. This called the baud rate, which is the speed in bits per second that data is sent over the serial connection. In the box under Serial line, enter the serial port you found that your board is using. These loopback adapters ship with all Digi Asynchronous boards. Under Connection type: choose the button next to Serial. Make sure you have a Digi loopback adapter plugged into whichever port you decided to test. If you see " Unable to open com#", it would indicate the port is already open, make sure all applications that might be accessing the port are closed, or their services (such as Routing and Remote Access service) have been stopped (faxing applications, RAS, Citrix MetaFrame, ect.).Ħ. You should now see a blinking cursor on the main HyperTerminal screen. Choose the defaults for all port properties. DO NOT SELECT THE MODEM DEVICE (we do not want to test using TAPI). In the Connect using drop down box, choose the com port you wish to test. It really does not matter what you choose for either. Choose Start > Accessories > Communications > HyperterminalĢ. Note: Microsoft Windows Vista, 7 and 8 do not have HyperTerminal installed by default, there are other terminal emulator applications which can be used instead, such as, PuTTY, Kermit, etc.ġ. ![]()
0 Comments
Leave a Reply. |